Telnet - D-Link DWR-921 User Manual
Hide thumbs
Also See for DWR-921:
- User manual (255 pages) ,
- Quick installation manual (52 pages) ,
- How to set up (4 pages)
Table of Contents
Advertisement
DWR-921 4G LTE Router
Configuring via Web-based Interface
User Manual
Telnet
On the System / Telnet page, you can enable or disable access to the device settings via TELNET
from your LAN. Access via TELNET is disabled by default. It is automatically enabled after
changing the default administrator password.
Figure 148. The System / Telnet page.
To disable access via TELNET, move the Enable Telnet switch to the left and click the APPLY
button.
To enable access via TELNET again, move the Enable Telnet switch to the right. In the Port
field, enter the number of the router's port through which access will be allowed (by default, the
port 23 is specified). Then click the APPLY button.
Page 180 of 191
Advertisement
Table of Contents
