Selecting Operation Mode - D-Link DWR-921 User Manual
Hide thumbs
Also See for DWR-921:
- User manual (255 pages) ,
- Quick installation manual (52 pages) ,
- How to set up (4 pages)
Table of Contents
Advertisement
DWR-921 4G LTE Router
Configuring via Web-based Interface
User Manual
Selecting Operation Mode
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. Then from the Work mode list select the
Router value. In this mode you can configure a WAN connection, set your own settings for the
wireless network, configure LAN ports to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
Figure 23. Selecting an operation mode. The Router mode.
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the 3G/LTE modem value. In this mode you can
configure an LTE WAN connection, set your own settings for the wireless network, and set your
own password for access to the web-based interface of the device.
Figure 24. Selecting an operation mode. The 3G/LTE modem mode.
Page 34 of 191
Advertisement
Table of Contents
