D-Link DWR-921 User Manual page 131

DWR-921 4G LTE Router
Configuring via Web-based Interface
User Manual
In order to disable the SNMP agent, move the SNMP service status switch to the left and click
the APPLY button.
If the SNMP manager operates over SNMPv2c, create a read-only community which will be used
by the SNMP manager to get data on the device. To do this, in the Communities section, click the
ADD button (
).
Figure 111. The window for adding a community.
In the opened window, specify the community name in the Name field and click the SAVE button.
To change a community name, select the relevant line in the table. In the opened window, specify
the needed value of the Name field and click the SAVE button.
To remove a community, select the checkbox located to the left of the relevant line in the table and
click the DELETE button ( ).
If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the
SNMP manager to get data on the device. To do this, in the Users section, click the ADD
button ( ).
Figure 112. The window for adding a user.
Page 131 of 191