Polaris RANGER XP 1000 Northstar Edition 2017 Owner's Manual page 56

OPERATION
POLARIS 3-Mode Throttle Control Switch
The 3-Mode Throttle Control switch has three positions:
• Performance (PERF)
• Standard (STND)
• Work (WORK)
Performance
The performance (PERF) setting maximizes throttle reponse
for quick acceleration along with full HP and torque.
Standard
The standard (STND) setting provides a balance of throttle
response and full HP and torque for everyday activities.
Work
The work setting optimizes slow speed drivability for
performing precise tasks by limiting throttle response and
maximum throttle oprning.
NOTE:
Always use Low gear for any of the following conditions regardless of the selected throttle
control settings and refer to page for more information on gear selection:
• Operating in rough terrain or over obsticles
• Loading the vehicle onto a trailer
• Towing heavy loads
• Driving frequency at low RPM or a ground speed below 7 MPH
54
PERF
STND
WORK