Polaris RANGER XP 1000 Northstar Edition 2017 Owner's Manual page 27

FEATURES AND CONTROLS
Switches
Winch Switch
Press the top of the rocker switch to spool line out from
OUT
the winch. Press the bottom of the rocker switch to
spool line in to the winch. Move the rocker switch to the
OFF
center position to stop spooling.
IN
Remote Winch Switch
Pull the remote winch switch and cable out from the
dash storage area. Press and hold the left side of the
switch to spool line out from the winch. Press and hold
the right side of the switch to spool line in to the winch.
Release the switch and it returns to the center "OFF"
IN
position to stop spooling.
OFF
OUT
Seat Heater Switches (if equipped)
The driver and passenger seat heater switches (if
equipped) are located on the control panel. Seat heater
wiring is located under the seats.
Press and release a switch to cycle through the available
heat settings:
• Low
• Medium
• High
Off
25