Polaris RANGER XP 1000 Northstar Edition 2017 Owner's Manual page 39

Instrument Cluster
Rider Information Center
Use the MODE button to toggle through the information area
options.
Display Units (Standard/Metric)
The display can be changed to display either standard or metric
units of measurement.
Tip: To exit the set-up mode at any time, wait 10 seconds.The display automatically exits and returns to
the odometer display.
Distance
Fuel
Temperature
Time
1. Turn the key to the OFF position.
2. Press and hold the MODE button while turning the key to the ON position.
3. When the display flashes the distance setting, tap the MODE button to advance to the
desired setting.
4. Press and hold the MODE button to save the setting and advance to the next display
option.
5. Repeat the procedure to change remaining display settings.
Clock Mode
Tip: The clock must be reset any time the battery has been disconnected or discharged.
1. Turn the key to the ON position. Use the MODE button to toggle to the odometer
display.
2. Press and hold the MODE button until the hour segment flashes. Release the button.
3. With the segment flashing, tap the MODE button to advance to the desired setting.
4. Press and hold the MODE button until the next segment flashes. Release the button.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. After completing the
1-minute segment, step 4 will save the new settings and exit the clock mode.
6. Turn the key to the OFF position.
Standard Display
Miles
U.S. Gallons
Fahrenheit
12-Hour Clock
FEATURES AND CONTROLS
Kilometers
Liters, Imperial Gallons
Celsius
24-Hour Clock
MODE
Button
Metric Display
37