Table of Contents
Advertisement
•
After rinsing under a tap ensure the blades are dry.
•
Please note the main body of the trimmer is not washable and should be kept away
from water.
•
After each use, it is recommended to clean hair from the blades either by rinsing the
blades or using a cleaning brush.
•
We recommend that you oil the blades regularly. Add a few drops on all gliding
surfaces, the cutting area and back pads of the blades.
BATTERY REMOVAL
We strongly recommend that a professional removes the rechargeable battery. Parts of
the case, and tools have sharp edges and may cause injury if not handled correctly.
•
The rechargeable battery must be removed from the appliance before it is
scrapped.
•
Disconnect the charging adapter before removing the battery.
1.
Turn the trimmer on and discharge all remaining power.
2.
Remove the trimmer head.
3.
Pry off the metal clip under the trimmer head.
4.
Pry off the decorative panel around the switch.
5.
Unscrew the 2 screws.
6.
Pry off the top housing and expose the printed circuit board.
7.
Take out the battery and printed circuit board assembly.
8.
Disconnect the battery from the circuit board.
•
Used batteries must be removed from the appliance and disposed of at an
appropriate official recycling/collection point.
•
Do not attempt to operate the device once you have opened it.
7
Advertisement
Table of Contents
