Remington PF7300 - Electric Shaver Manual

Product Features

1. On/Off button
2. Foils
3. Cutter assembly
4. Hairpocket: the space inside the cutter assembly
5. Power port

6. Pop-up trimmer
7. Head guard
8. Power adapter
9. Cleaning brush

Product may vary slightly from what is illustrated.

About Your Shaver

Cordless/Rechargeable - The shaver can only be used without the power adaptor.
Indicators: Single LED - Solid green light indicates shaver is charging. Light will stay on at full charge until unplugged.

Charging

Before using, read the important safety instructions in front of the manual.

1. Connect the cord to the shaver and then to the electrical outlet. (Diagrams A & B) The charging indicator light will glow green.
   
2. Your shaver will have a partially charged battery. We recommend giving the battery a full charge prior to your first use. (Diagram C)
   

Use the product until the battery is low. To preserve the life of the batteries, let them fully run out every six months, then recharge them for a full 24 hours.

• Make sure the shaver and your hands are dry when placing the shaver on charge.
• Always charge the shaver in a cool, dry place.

Shave

Before using, read the important safety instructions in front of the manual.

1. Begin by removing the protective head guard from your shaver.
2. Press the on/off button to turn on. (Diagram D)
   
3. Stretch the skin with your free hand so the hairs stand upright.
4. Hold the shaving head so all screens touch your skin simultaneously. The independently floating foils automatically adjust to the contours of your face. Only apply light pressure on the shaving head while shaving and use short, circular strokes. (Diagram E)
   
5. After shaving, turn the shaver off. (Diagram D)

Remington recommends that you use your new shaver daily for up to three weeks to allow time for your hair and skin to become accustomed to the new shaving system.

Shaving Tips

• Ensure your skin is dry and free of oils.
• Wait at least 15 minutes after getting up before shaving, to ensure your face is free of puffiness that may be present from sleeping.
• Always hold the shaver at a right angle to the skin so the screens are touching the skin with equal pressure.
• Stretch skin with the free hand so hairs stand upright, making it easier for them to enter the cutting chamber.
• Shave with short, circular strokes. The use of short, circular motions in stubborn areas may obtain a closer shave, especially along the neck and chin line.
• Do not press hard against the skin in order to avoid damage to the foil heads.

Trim

1. Slide trimmer release button up to engage the trimmer. (Diagram F)
   
2. Trim long, difficult hairs and side burns. (Diagram G)
   
3. Close trimmer by sliding the button down. (Diagram H)
   

Cleaning and Care

NOTE: When cleaning your shaver, make sure the shaver is turned off and disconnected from the power cord.

For optimal shaver performance, clean your shaver after each use.

• Do not remove or replace head assembly while shaver is running as it may cause damage to the unit's screens and cutters.
• To clean the external surfaces of the shaver, use a damp cloth. Do not use strong detergents or other chemicals.
• To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer or heater to dry the shaver.
• The shaver should not be used until it has dried.
• Lubricate each cutter with household oil.
• This shaver has no user serviceable parts.

Daily Cleaning:

1. Grasp the raised grips on the cutter assembly and pull away from the shaver body. The raised grips are on the front and back. (Diagram I)
   
2. Tap the stubble from the foils and cutters.
3. Replace the cutter assembly.

Monthly Cleaning:

1. Grasp the raised grips on the cutter assembly and pull away from the shaver body. The raised grips are on the front and back. (Diagram I)
2. Tap the stubble from the foils and cutters.
3. Use the cleaning brush to sweep away loose hairs from the cutters and from inside the hair pocket. (Diagram J).
   
4. Replace the cutter assembly.

Battery Removal

When your rechargeable shaver reaches the end of its useful life, the batteries must be removed from the shaver and recycled or disposed of properly in accordance with your state and local requirements. If this is not required by law, you may elect to dispose of the shaver with the batteries.

This device uses one of the following types of rechargeable batteries: nickel metal hydride (NiMH), nickel cadmium (Ni-Cd) or Lithium Ion (Li-Ion) (see included battery for indication of type).

ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED OF IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. DO NOT PUT IN FIRE OR MUTILATE, AS THE BATTERY MAY BURST OR RELEASE TOXIC MATERIALS. DO NOT SHORT-CIRCUIT, AS THIS MAY CAUSE BURNS.

1. Remove phillips head screw at the base of the shaver.
2. Pry the outer sleeve off the shaver handle.
3. Pry back the housing cover off the shaver.
4. Snip the battery wires and remove the batteries.
5. Dispose of batteries properly.

Spectrum Brands, Inc. is a proud participant in the EPA-approved Rechargeable Battery Recycling Call2Recycle^TM, which collects and recycles these batteries at the end of their useful life when taken out of services in the United States or Canada. The RBRC® program provides a convenient alternative to placing used LiFePO4 batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY^TM or visit www.call2recycle.org for information on LiFePO4 battery recycling and disposal bans/restriction in your area. Spectrum Brands, Inc.'s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.

How To Order Shaver Accessories

Please refer to the shaver comparison and features chart near the front of this manual that lists the correct replacement part number for your shaver.

It is very important to replace your head and cutters when necessary to ensure a close, comfortable shave without irritation. We recommend they be replaced every 12 months. Here are some signs of head and cutter wear, indicating that replacement is needed:

• Irritation: As the heads get excessively worn you may experience some skin irritation. This would be especially noticeable when you apply moisturizing lotion.
• Pulling: When the cutters wear you may feel a sense of pulling and a loss of closeness when you shave. This is an indication that it is time to replace your heads and cutters.

Maintain your shaver's peak performance! Keep your shaver performing like new!

• Because your satisfaction is important to us, we want to make it simple for you to keep your new shaver performing at its peak.
• For the best possible shave, it is necessary to replace the heads and cutters on your shaver every 12 months.
• Remington makes this easy!

Call! U.S. Residents call 800-392-6544

Documents / Resources

References

• http://www.call2recycle.org

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Remington PF7300 - Electric Shaver Manual