Assembly; Cleaning Formulas - Bissell CROSSWAVE PET 2328 Series Manual

Assembly

WARNING
Do not plug in your CrossWave® Pet until you are familiar with all instructions
and operating procedures.
1 Insert handle
into body of
unit until you
hear a click.
click
4
NOTE:
To easily unwrap the cord for use, just turn the quick release cord wrap downward
to remove the cord from the cord wrap.

Cleaning Formulas

WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only
BISSELL cleaning fluids intended for use with the hard floor device.
Keep plenty of CrossWave®
formulas on hand so you
can clean your hard floors
and area rugs whenever it
fits your schedule.
Always use CrossWave®
formulas in your machine.
Other solutions may harm
the machine and void the
warranty.
Then, on the back
2
of the machine,
align clean water
tank with the
grooves and slide
tank into place
until you hear a
click.
The multi-functional Rinse and Storage Tray
includes a machine storage tray, brush roll drying
tray with rinse funnel, and rinse cup. To assemble,
slide the over hang in the middle of the brush roll
drying tray with rinse funnel down into the opening
on the storage tray that is indicated with arrows.
Then, place the Rinse Cup into the Rinse Funnel.
CROSSWAVE® FORMULAS
Multi-Surface
Formula
Great for cleaning
Restore your wood
ALL sealed floors
floors' natural shine
and area rugs
3
Wrap the cord around the
quick release cord wrap
and the lower cord wrap.
Wood Floor
Area Rug Formula
Formula
Removes stuck on
and embedded dirt
from area rugs
Multi-Surface
Pet with Febreze
Formula
Removes Pet odors
to clean and refresh
www.BISSELL.com
5