QUICK START GUIDE
CROSSWAVE
Quick Start Usage Instructions
click
1. First, insert the handle
2. For small area cleaning (<350 sq ft), fill the
at the top of the body
of the machine until
you hear a click.
161-3889 10/17 RevA
SMALL AREA CLEANING
LARGE AREA CLEANING
clean water tank with warm tap water to
the first water fill line. Then add formula to
the first formula fill line.
For large area cleaning (up to 700 sq ft),
fill the clean water tank with warm tap
water to the second water fill line. Then
add formula until you get to the second
formula fill line. Screw the cap back onto
the clean water tank.
PET SERIES
®
BUTTON
3. On the back of the
4. Turn machine on by
machine, align clean
selecting the type
water tank with the
of floor you will be
grooves and slide tank
cleaning. For hard
into place until you
floors, choose the
hear a click.
HARD FLOOR button
and for area rugs push
the RUG button.
2303, 2305, 2306, 2328 SERIES
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
HARD FLOOR
BUTTON
RUG
5. Each time you use the
product, hold the solution
trigger for 10 seconds to
prime the system with
cleaning solution before
you begin cleaning. When
you hold the trigger, LED
lights will illuminate.
When solution is flowing,
you will see bubbles
forming at the edges of
the brush roll window.
You are ready to start
cleaning with your
BISSELL® CrossWave® Pet!