Bissell CROSSWAVE PET 2328 Series Manual page 6

Filling Your Clean Water Tank
1
The clean water tank is
located on the back of
the machine.
Clean Water Tank
Dirty Water Tank
4
For large area cleaning (up to 700 sq ft)
a. Fill formula tank with warm tap water to the
second water fill line.
b. Then add formula to the second formula
fill line.
5
Screw the cap back onto the clean water
tank.
A few notes about filling the clean water tank:
• Fill with warm (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER
OR TANK IN MICROWAVE.
6
www.BISSELL.com
2
Lift the clean water tank
straight up to remove from
the machine.
For small area cleaning (<350 sq ft)
a. Fill formula tank with warm tap water to the
first water fill line.
b. Then add formula to the first formula fill
line.
6
3
Unscrew the cap from the
clean water tank.
The clean water tank has
two measuring volumes
depending on the amount
of space you would like
to clean.
On the back of the machine,
align clean water tank with the
grooves and slide tank into
place until you hear a click.