Power On And Off - Humminbird PiranhaMAX 197c Installation And Operation Manual

Powering ON and OFF
Use the following instructions to turn on your PiranhaMAX unit:
Power on and Start Operation
1. Power On: Press and hold the POWER/MENU
key until the PiranhaMAX powers on, then
release the key.
2. Press the UP or DOWN Arrow key to select
Normal.
3. Press the CHECK/ENTER key.
NOTE: See The PiranhaMAX Control Head and Using the
Menu System for more information.
Notes about Starting Operation
• A transducer must be connected to the control head to enable Normal
mode.
• International units powered on for the first time will first display Setup
menu options such as Language, Units - Distance, Units - Speed, etc.
for initial system setup (see Setting up the Control Head).
• If Simulator Mode is selected from the Start-up Menu and a transducer
is plugged in, some menu setting changes will be saved in memory
even after the unit is powered down. Menu setting changes will not be
saved when a transducer is not connected.
Power Off
1. Power Off: Press and hold the POWER/MENU key until the unit
powers off.
Powering On and Off
40