14
ELECTRICAL SYSTEM
14.1
Removing the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of batteries with less than the minimum voltage correctly.
14.2
Installing the battery
(All XC models)
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
–
Disconnect negative cable
–
Pull back positive terminal cover
battery.
–
Remove screw
–
Pull holding bracket
F00138-10
(All XC models)
Main work
–
Position the battery in the battery compartment with the terminals facing forward,
and secure with holding bracket
Battery (HJTZ5S-FP) (
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Connect positive cable
Guideline
Screw, battery terminal
Contact disks
the claws toward the battery terminal.
–
Slide positive terminal cover
–
Connect negative cable
Guideline
H00386-10
Screw, battery terminal
Finishing work
–
Mount the seat. (
1 m (3 ft)
9 V
p. 52)
from the battery.
and disconnect the positive cable from the
.
forward and remove battery toward the top.
.
p. 122)
.
to the battery.
must be mounted under screws
over the positive terminal.
to the battery.
p. 53)
M6
10 Nm (7.4 lbf ft)
M5
2.5 Nm
(1.84 lbf ft)
and cable sockets
M5
2.5 Nm
(1.84 lbf ft)
81
with