11
SERVICE WORK ON THE CHASSIS
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
H01330-10
–
Fill bleeding syringe
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove bleeder screw
syringe
K00520-10
–
Now inject the liquid into the system until it emerges from the drill hole
master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
–
Position the cover with the membrane. Mount and tighten the screws.
L01223-10
Info
Clean up overflowed or spilled brake fluid immediately with water.
.
with membrane
.
with the appropriate hydraulic fluid.
p. 127)
.
and mount bleeding
4 mm (0.16 in)
66
of the