KTM 150 SX 2017 Owner's Manual page 101

17 SERVICE WORK ON THE ENGINE
Main work
(All 125/150 models)
–
Remove the gear oil drain plug with magnet
–
Remove gear oil drain plug
–
Let the gear oil drain fully.
–
Clean the gear oil drain plug thoroughly.
–
Clean the sealing surface on the engine.
–
Mount and tighten gear oil drain plug with the magnet
ring.
Guideline
Gear oil drain plug with magnet
–
Mount gear oil drain plug
Guideline
Gear oil drain plug
M01177-10
–
Remove filler plug
Gear oil
–
Mount and tighten the oil filler plug.
K00530-10
–
Start the engine and check that it is oil-tight.
(All 250/300 models)
–
Remove the gear oil drain plug with magnet
–
Let the gear oil drain fully.
–
Thoroughly clean the gear oil drain plug with magnet.
–
Clean the sealing surface on the engine.
–
Mount and tighten gear oil drain plug with the magnet
ring.
Guideline
K00493-10
Gear oil drain plug with magnet (All
250 SX models)
Gear oil drain plug with magnet (All
XC models)
–
Remove filler plug
Gear oil
–
Mount and tighten the oil filler plug.
401955-11

.

with the new seal ring and tighten.

and fill up with gear oil.
0.80 l (0.85 qt.)
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
–
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
 and fill up with gear oil.
0.80 l (0.85 qt.)
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
–
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.

.

and the new seal
M12x1.5 20 Nm
(14.8 lbf ft)
M10x1 15 Nm
(11.1 lbf ft)
Engine oil (15W/50) ( p. 127)

.

and the new seal
M12x1.5 20 Nm
(14.8 lbf ft)
M12x1.5 20 Nm
(14.8 lbf ft)
Engine oil (15W/50) ( p. 127)
99