Table of Contents
Advertisement
ITEM
FIT TO LETTER
TEXT HEIGHT
FX
EMULATION
This menu controls settings effective when the printer is operating in FX emulation mode.
ITEM
CHARACTER PITCH
CHARACTER SET
SYMBOL SET
LETTER 0 STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
SETTINGS
DISABLE
ENABLE
SAME
DIFF
SETTINGS
10 CPI; 12 CPI; 17
CPI; 20 CPI;
PROPORTIONAL
SET-1
SET-2
IBM-437 (Default
Symbol Set only
shown)
DISABLE
ENABLE
NORMAL
SLASHED
6 LPI; 8 LPI
OFF / ON
CR / CR+LF
80 COLUMN; 136
COLUMN
11 INCH
11.7 INCH
12 INCH
0.0INCH ~ 1.0INCH
0.0INCH ~ 1.0INCH
DISABLE
ENABLE
SAME
DIFF
Menu functions > 51
EXPLANATION
Sets the printing mode that can fit print data,
equivalent to 11 inches (66 lines), in the LETTER-size
printable area.
Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
EXPLANATION
Specifies character pitch in this emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH with letter o and
9DH with a zero
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether blank pages are printed or not.
Selects whether a received carriage return character
(0Dh) also causes a line feed.
Specifies the number of characters per line.
Specifies the length of paper.
Specifies the distance of print from the top edge of the
paper.
Specifies the distance of print from the left hand edge
of the paper.
Sets the printing mode that can fit print data,
equivalent to 11 inches (66 lines), in the LETTER-size
printable area.
Sets the height of a character.
SAME: Regardless of CPI, same height.
DIFF: As CPI, character heights vary.
Advertisement
Table of Contents
