Table of Contents
Advertisement
Memory Viewer function menu (continued)
Direct start-up into the memory viewer mode
After inserting the USB thumb drive, the USB thumb drive blinks, the input mode automatically switches to
"Network", and then an image stored in the root directory of the USB thumb drive is displayed on the screen.
* I f the image file is not available in the root directory of the USB thumb drive, the memory viewer browser
window appears.
* W hen the projector is turned off and on while the USB thumb drive is left inside in the memory viewer
mode, the projector starts into the memory viewer mode and an image stored in the USB thumb drive is
displayed on the screen.
When you press <AUTO SET/CANCEL> button in the memory viewer mode, the memory viewer browser
window as shown on page 42 appears on the screen.
When you remove the USB thumb drive during operating the projector in the memory viewer mode,
the input source returns to the previous one selected just before inserting the USB thumb drive.
D uring accessing to the USB thumb drive, do not turn off the power or eject the USB thumb drive
because the data in the USB thumb drive might get damaged. During accessing, the USB thumb drive is
blinking.
The USB thumb drive allows you to insert or remove regardless of the power status of the projector.
T he direct start-up into the memory viewer mode may not operate when the USB thumb drive is inserted
immediately after being removed.
D uring in [Multi live] mode of "Wireless Manager ME5.5" or [Deliver image to all] mode of "Multi Projector
Monitoring & Control", the direct start-up into the memory viewer mode is not available. After terminating
[Multi live] or [Deliver image to all], insert the USB thumb drive, or operate "Entering the memory viewer
mode" on the next page.
40
AUTO SET/CANCEL
button
Remote Control
Advertisement
Table of Contents
