Panasonic PT-VX400NTE Operating Instructions Manual page 43

Memory Viewer function menu (continued)
Termination of memory viewer
To terminate the memory viewer function, take one of methods described below.
 Terminate with projector's on-screen menu.
1. Select "Wired" or "Wireless" from the input menu of the projector. Press <SELECT> button.
2. Select "Memory Viewer" with the point ▲ ▼ buttons and press <SELECT> button. The "Enter/Exit" pallet of
the memory viewer appears.
3. Select "Exit" and press <SELECT> button.
 Terminate with memory viewer mode
1. D uring the image displaying, press <AUTO SET/CANCEL> button. The browser window appears on the
screen.
2. Press <AUTO SET/CANCEL> button again. The cursor moves to menu item.
3. Select "Exit" on the browser window with the point ◄► buttons and press <SELECT> button.
Formatting the USB thumb drive
A new USB thumb drive or a USB thumb drive formatted by computer or camera must be formatted by
this product. Memory Viewer function may not operate properly with a USB thumb drive formatted by
other equipment.
1. I n the memory viewer mode, press <AUTO SET/CANCEL> button. The browser window appears on the
screen.
2. Press <AUTO SET/CANCEL> button again. The cursor moves to menu item.
3. S elect "Format" from "Set" with the point buttons and press <SELECT> button. The format confirmation
window appears.
4. S elect "OK" with the ◄► buttons and press <SELECT> button to start formatting. It takes about 1-2
seconds to complete the formatting.
 D uring formatting the USB thumb drive, do not turn off the power or eject the USB thumb drive because
the data in the USB thumb drive might get damaged. During formatting, the USB thumb drive is blinking.
43