Panasonic PT-VX400NTE Operating Instructions Manual page 12

Hide thumbs Also See for PT-VX400NTE:
Table of Contents

Advertisement

NETWORK menu (continued)
2
Press ▲ ▼ to select an item, and change the setting according to the instructions.
Name change
DHCP
(DHCP client function)
IP address
(Display of IP address and setting)
Subnet mask
(Displaying and setting the subnet
mask)
Default gateway
(Display of gateway address and
setting)
DNS1
(Display of Preferred DNS server
address and setting)
DNS2
(Display of Alternate DNS server
address and setting)
"Glossary" (
See page 44 – 45)
Before using the DHCP server, make sure the DHCP server is already functioning.
For details of IP address, subnet mask, gateway and DNS server, ask the network administrator.
A wired LAN and wireless LAN cannot be used in the same segment.
3
Press ▲ ▼◄► to select [Next], and press <SELECT> button.
[Wired detailed setup] screen (2/3) setting screen is displayed.
Make the settings related to the wireless connection between the projector and the network.
Select [Cancel] instead of [Next] to cancel the configuration change.
SSID
z
SSID has to be entered in alphanumeric letters.
You cannot set "any" or "ANY" for SSID.
Mode
z
AD HOC
Infrastructure
"Glossary" (
See page
12
You can change the user name.
ON:
OFF: If a DHCP server does not exist in the network to which
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
Enter the alternate DNS server address if DHCP server is not used.
: If the mode is [AD HOC], enter the same character string as that of SSID
set on the computer to be connected. If the mode is [Infrastructure
enter the SSID registered at the access point
: Select [AD HOC] or [Infrastructure].
: Connect projector and computer directly without access point.
: Connect through access point.
)
44 – 45
If a DHCP server exists in the network to which the projector
is connected, the IP address will automatically be acquired.
the projector is connected, additionally set [IP address
[Subnet mask
] and [Default gateway
].
],
.
],

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vx400ntuPt-vx400ntea

Table of Contents