Panasonic PT-VX400NTE Operating Instructions Manual page 13

Hide thumbs Also See for PT-VX400NTE:
Table of Contents

Advertisement

NETWORK menu (continued)
Authentication
z
OPEN
SHARED
WPA-PSK
2
WPA2-PSK
WPA-EAP/
WPA2-EAP
WPA-EAP
2
WPA2-EAP
Encryption
z
NONE
WEP
1
TKIP
1
AES
1
Channel
3
1: "Glossary" (
2: Available when the mode is set to [Infrastructure].
3: Available when the mode is set to [AD HOC}.
Important video/audio data is protected because AES encryption pr ng takes place in advance for all
network numbers, even if [Encryption] is set to [NONE].
4
Press ▲ ▼◄► to select [Next], and press <SELECT> button.
At this point, select [Back] to go back to the previous screen (1/3), or select [Cancel] to cancel the
configuration change.
In addition, further perform the following setting depending on [Authentication] and [Encryption] settings.
The setting menu is different depending on the setting of [Authentication] and [Encryption]. The above menu
is an example when [Authentication] is set to [OPEN] or [SHARED] and [Encryption] is set to [WEP].
: Set the user authentication method used by the network to be connected.
: Select when making a connection using [AD HOC], or when the access
point authentication method is OpenSystem
: Select when making a connection using [AD HOC], or when the access
point authentication method is Shared Key
: Select when the access point authentication method is WPA-PSK
: Select when the access point authentication method is WPA2-PSK
2
: Select when the access point authentication method is WPA-EAP
WPA2-EAP
2
: Select when the access point authentication method is WPA-EAP
: Select when the access point authentication method is WPA2-EAP
2
: Select the encryption method to be used for communication between the
projector and the network.
: Select when transmit without encryption. It is selectable only when
[Authentication] is [OPEN] or [SHARED].
: Select when Encryption is WEP.
: Select when Encryption is TKIP.
Selectable when [Authentication] is either [WPA-PSK], [WPA2-PSK],
[WPA-EAP], [WPA2-EAP].
: Select when Encryption is AES.
Selectable when [Authentication] is either [WPA-PSK], [WPA2-PSK],
[WPA-EAP], [WPA2-EAP].
Select the channel to use. Refer to page 6 for usable channels.
See page 44 – 45)
.
1
.
1
.
1
.
1
.
1
/
1
.
1
.
1
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vx400ntuPt-vx400ntea

Table of Contents