Inserting The Cord - Bernina 540 User Manual

Decorative stitches

Inserting the cord

> Switch the machine off and disconnect it from the power supply system.
> Remove the needle.
> Remove the presser foot.
> Remove the stitch plate.
> Open the bobbin cover.
> Pull the cord through the hook opening from the bottom and through the opening of the stitch plate.
> Replace the stitch plate.
> Close the bobbin cover.
> Make sure that the cord slides through the little thread slot of the bobbin cover.
98
Pintuck foot Number
# 31 (optional accessory)
# 32 (optional accessory)
# 33 (optional accessory)
# 46C (optional accessory)
Description
5 grooves
For heavy to medium-weight
fabrics.
In combination with the 3 mm
double needle
7 grooves
For light to medium-weight
fabrics.
In combination with the 2 mm
double needle
9 grooves
For very light fabrics (without
pintuck cord).
In combination with the 1 or
1.6 mm double needle
5 grooves
In combination with the 1.6 –
2.5 mm double needle
For very light to medium-weight
fabrics.