Elation FUZE SFX WH User Manual page 26

S O F T WA R E U P D AT E
Software Update Via USB for Single-Fixture Only.
Contact Elation Service for updated software:
@323-582-3322 | Fax 323-832-9142 | support@elationlighting.com
Copy the latest software to a USB Flash Drive. Ensure the fixture is turned off. With the fixture
powered off, insert the USB Flash Drive into the USB Service Port, then power the fixture on.
Select the desired software using the UP and DOWN buttons, and press ENTER.
Select ON, and press ENTER, at which time the software will begin loading.
Do not interrupt the process as it is loading.
Do not unplug the USB Flash Drive from the
fixture as it is loading. Once it finished loading,
the fixture will automatically enter a reset status.
If the process of loading software is interrupted,
the fixture will not run.
26