Software Update - Elation FUZE SFX WH User Manual

S O F T WA R E U P D AT E
Software Update Via USB for Single-Fixture or Multiple Linked Fixtures.
Contact Elation Service for updated software:
@323-582-3322 | Fax 323-832-9142 | support@elationlighting.com
Copy the latest software to a USB Flash Drive. With the software loaded on the USB Flash
Drive, insert it into the USB Service Port.
With the USB Flash Drive inserted, select MENU Personality and press ENTER.
Select Service, and then enter the passcode, 050, and press ENTER.
Select Update Software, and press ENTER, then select YES, and press ENTER.
Use the UP and DOWN buttons to select software, and press ENTER, then select ON, and press
ENTER, at which time the software will begin loading.
Do not interrupt the process as it is loading.
Do not unplug the USB Flash Drive from the
fixture as it is loading. Once it finished loading,
the fixture will automatically enter a reset status.
If the process of loading software is interrupted,
the fixture will not run.
25