Installing The Chassis In The Rack - Alcatel-Lucent OmniSwitch 6860N Hardware User's Manual

Rack-Mounting

Installing the Chassis In the Rack

Mark the holes on the rack where the chassis is to be installed.
1
One person should lift and position the chassis until the rack-mount flanges are flush with the
2
rack post.
Align the holes in the flanges with the rack holes marked in step 1.
3
Once the holes are aligned, the second person should insert a screw through the bottom hole on each
4
flange. Tighten both screws until they are secure.
Install the remaining screws in the top hole of each flange. Be sure that all screws are
5
securely tightened.
page 3-42 OmniSwitch 6860 Hardware Users Guide
Chassis and Power Supplies
October 2022