Casio fx-CG50 User Manual page 647

10. Using Sample Data Memory
Performing a Data Logger sampling operation from the E-CON4 mode causes sampled
results to be stored in the "current data area" of E-CON4 memory. Separate data is saved
for each channel, and the data for a particular channel in the current data area is called that
channel's "current data".
Any time you perform a sampling operation, the current data of the channel(s) you use is
replaced by the newly sampled data. If you want to save a set of current data and keep it
from being replaced by a new sampling operation, save the data in sample data memory
under a different file name.
k Managing Sample Data Files
• To save current sample data to a file
1. On the sampling screen, press 4(OTHER)1(GRAPH).
• This displays the Graph Mode screen.
• For details about the Graph Mode screen, see "Using the Graph Analysis Tools to
Graph Data" (page
2. Press 2(DATA).
• This displays the Sampling Data List screen.
3. Use the f and c cursor keys to move the highlighting to the current data file you want
to save, and then press 2(SAVE).
• This displays the screen for inputting a data name.
ε
Using Sample Data Memory
ε
-35).
List of current data files
"cd" stands for "current data". The text on
the right side of the colon indicates the
channel name.
-33
Sampling Data List Screen
Graph Mode Screen