Casio fx-CG50 User Manual page 548

u
To save all the contents of the 3D graph function list to 3D graph memory
1. Press 4(3D-GMEM)1(STORE).
2. On the pop-up window that appears, specify a 3D graph memory number (1 to 20) and then
press w.
Pressing bw, for example, stores all the contents of the 3D graph function list and 3D
•
View Window settings to 3D Graph Memory 1 (3DGMEM1).
Specifying the number of a memory that already contains data and then pressing w will
•
causes the existing data to be replaced by the new data.
• An error will occur if the data you are saving causes the calculator's memory capacity to
be exceeded.
u
To recall 3D graph memory data
1. Press 4(3D-GMEM)2(RECALL).
2. On the pop-up window that appears, specify a 3D graph memory number (1 to 20) and then
press w.
Pressing bw, for example, recalls the data stored in 3D Graph Memory 1 (3DGMEM1).
•
Performing the recall operation replaces all of the current 3D graph function list contents
•
and 3D View Window settings with the recalled contents. The current data is deleted.
Note
• 3D graph memory created using 3D Graph Version 1.01 cannot be used by 3D Graph
Version 1.00.
4. 3D Graph Function Selection Screen
On the 3D graph function list, press 3(TYPE) or d/e to display the 3D graph function
selection screen.
Note
Selecting a registered function and then pressing d or e will display an input screen for
•
the selected function.
16-8