Casio fx-CG50 User Manual page 125

u To create a list by specifying the number of data items
Use the following procedure to specify the number of data in the assignment statement and
create a list.
> aK1(LIST) 3(Dim) 1(List) <list number 1 - 26> w (
n
<number of data
Example To create five data items (each of which contains 0) in List 1
AfaK1(LIST) 3(Dim)
1(List) bw
You can view the newly created list by entering the
Statistics mode.
u To replace all data items with the same value
K1(LIST) 4(Fill( ) <value> ,1(List) <list number 1 - 26> )w
Example To replace all data items in List 1 with the number 3
AK1(LIST) 4(Fill( )
d,1(List) b)w
The following shows the new contents of List 1.
u To generate a sequence of numbers
K1(LIST) 5(Seq) <expression> , <variable name> , <start value> , <end value>
, <increment> )w
• The result of this operation is stored in ListAns Memory.
Example To input the number sequence 1
f x
( ) = X
increment of 5.
AK1(LIST) 5(Seq) vx,
v,b,bb,f)w
Specifying an ending value of 12, 13, 14, or 15 produces the same result as shown above
since they are less than the value produced by the next increment (16).
2 . Use a starting value of 1, an ending value of 11, and an
3-9
2 , 6 2 , 11 2 , into a list, using the function
[OPTN] - [LIST] - [Dim]
n
= 1 - 999)
[OPTN] - [LIST] - [Fill(]
[OPTN] - [LIST] - [Seq]