Casio fx-CG50 User Manual page 566

Important!
Among the text strings above that are input using key operations,
that are followed by parentheses,
functions. To use these functions, you first need to import the math module.* For details, see
"Command Categories" (page 17-10) and "Operation Example: To use math module functions"
(page 17-13).
import
* If you use
each function you use. See "Using Modules (
u
Alphabet Key Input
The first input immediately after a is pressed or if input was put into alpha lock by pressing
!a (page 1-2), pressing a key will input the character marked in red on a key, a space or
quotation marks (").
• Selecting {NEW} or {OPEN} from the file list screen will display the script editor screen and
automatically puts input into lowercase alpha lock.
u
Auto Indent when a Newline is Input
From the Python mode script editor screen, pressing w will input a newline.
w after a line that ends with a colon (:) automatically indents the new line two
• Pressing
spaces more than the line above it (Auto Indent).
w while the cursor is located in an indented line will indent the line following the
• Pressing
newline by the same amount as the indented line above it.
• To perform a newline without indenting the new line, press
Newline codes are not displayed in the Python mode.
k
Using the Function Menu to Input Text (Alphanumeric Characters,
Symbols, Operators)
Use the function menus shown in the table below to input alphanumeric characters, symbols,
or operators.
Script Editor Screen
3(SYMBOL) (symbols)
4(CHAR) (alphanumeric
characters, symbols, operators)
6(g)2(OPERAT) (operators)
e
(base of a natural logarithm), and
from
instead of to input the module, you need to append "math." before
Key Operation
6(CHAR)
(alphanumeric
characters, symbols,
operators)
import
)" (page 17-12 for more information).
!w.
SHELL Screen
—
—
17-7
log
() and other functions
pi
are math module
Inputtable Characters
(Alphanumeric Characters,
Symbols, Operators)
, () [] : ; # ' " \ _
= != > < % | ^ & ~