Casio fx-CG50 User Manual page 446

3. Turn off the receiver.
4. Connect the receiver to the sender.
5. Starting a send operation on the sender causes the receiver to turn on automatically and
performs the data transfer operation.
k Capture Set Mode
You can specify either g3p format or bmp format for screen images saved by the operation
!h(CAPTURE).
The data communication menu provides the following operations.
6(CAPTURE) 1(Memory) ... Saves screen capture images in g3p format.
6(CAPTURE) 2(BMP) ... Saves screen capture images in bmp format.
For details about the screen capture operation, see "Using Screen Capture" (page 1-39).
k Select Connection Mode Screen
Connecting the USB cable to the calculator will cause the "Select Connection Mode" dialog
box to appear. The key operation you should perform on this screen depends on the device
currently connected to the calculator.
• 1(USB Flash) ... Mode for connecting the calculator to
• 2(ScreenRecv) ... Mode for using the Screen Receiver
• 3(ScreenR(XP)) ... Mode for using the Screen Receiver software on a Windows
• 4(Projector) ... Mode for connecting the calculator to a projector and projecting the
Important!
The "Select Connection Mode" dialog box will not appear if you connect the USB cable to
the calculator while the
or other figure is flashing on the display. Wait until the
required operation to stop the flashing of the graph or figure, and then try connecting the USB
cable again.
a computer for data transfer. See
"To establish a connection between the
calculator and a computer" (page 13-3).
software on a Windows Vista
computer to display the calculator
screen on the computer. For details, see the separate "Screen Receiver
User's Guide".
Wait until the calculator screen appears on the Screen Receiver window
before performing any calculator operation.
computer to display the calculator screen on the computer.
calculator screen. See "Connecting the Calculator to a Projector" (page
13-14).
icon is in the status bar or while a graph, Geometry mode figure,
®
or later
icon disappears, or perform the
13-2
®
XP