Omron ZS-HL-N Series Command Reference Manual page 9

Unit No. Data No.
2 0
2
6
13
14
32
36
37
38
39
3 0
2
3
4
6
Parameter
LD power mode 0: Auto
1: Auto-scale
2: Fixed
Surface to be controlled 0: Peak
for light amount
1: First surface
2: Second surface
3: Third surface
LD power when fixed 0 to 800 (1 div: 0.1%)
Lower limit of LD power 0 to 800 (1 div: 0.1%)
Upper limit of LD power 0 to 800 (1 div: 0.1%)
Incident level 0 to 4095
LD power 0 to 800 (1 div: 0.1%)
Incident level 0 to 4095
(First surface)
Incident level 0 to 4095
(Second surface)
Incident level 0 to 4095
(Third surface)
Measurement object When multi-task mode is OFF.
0: STANDARD
1: PCB
2: Mirror
3: Glass surface
4: Glass thickness
When multi-task mode is ON.
0: STANDARD
1: PCB
2: Mirror
3: Glass surface
GLASS/GLASS 0: Mode 1
THICKNESS mode
1: Mode 2
Image smoothing level 0: No filter
1: Filter size 2
2: Filter size 4
3: Filter size 8
4: Filter size 16
Background removing 0 to 255 (tone)
level before addition
Edge threshold 0: 0%
1: 12.5%
2: 25%
3: 37.5%
4: 50%
5: 62.5%
6: 75%
7: 87.5%
Setting range/Output range
Non-procedural Communication Command Reference
List of Parameters
Others
When the
measurement object is
changed, the settings
are initialized
according to the
selected object.
ZS-HL-N Series
7