Omron ZS-HL-N Series Command Reference Manual page 7

* Format of a returned value
A returned value for MEASURE,M,DATAGET,CFLOGGET,CFDATGET is the right aligned 11 characters.
* Upper case and lower case characters
For alphabetic, only upper case characters are accepted.
* Task No.
Omit <Task No.> when issuing a command for ZS-LDC.
Task Nos are assigned as follows: 0: TASK1 1: TASK2 2: TASK3 3: TASK4.
List of Non-procedural Commands
ZS-HL-N Series
Non-procedural Communication Command Reference
5