Function Thread Away On/Off; Programming Securing Stitches (Smart Secure) - Bernina 590 User Manual

> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Select fabric thickness».
> Select fabric thickness.

Function thread away on/off

To pull the thread end out of the fabric being cut, the function must be activated. For embroidery motifs
with long stitches, it is recommended to deactivate the function thread away. When the distance between
the presser foot and the embroidery hoop is too short, the function is not carried out.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Thread away».
> To activate the function thread away, set the switch to «I».
> To deactivate the function thread away, set the switch to «0».

Programming securing stitches (Smart Secure)

Embroidery motifs are programmed with or without securing stitches. The machine detects if no securing
stitches are programmed and adds these.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Securing stitches on/off».
> To switch off securing stitches at the start, move the switch in the upper right-hand area to «0».
– If the embroidery motif has programmed securing stitches, they will be embroidered.
– If the embroidery motif doesn't have any programmed securing stitches, none are embroidered.
Setup Program
55