Cleaning The Thread Catcher; Lubricating The Machine - Bernina 590 User Manual

Setup Program
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Transfer saved data to machine».
– The icon is checkmarked in green.

Cleaning the thread catcher

The chapter «Maintenance and cleaning» provides additional illustrated step-by-step instructions for this.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Clean thread catcher».
> Clean the thread catcher according to the instructions on the display.

Lubricating the machine

Electronically driven components
CAUTION
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply system.
NOTICE Lubricating the hook
Too much oil can pollute the fabric and the thread.
> After lubricating, sew/embroider a test piece first.
The Setup Program provides animations how the machine has to be oiled. In chapter «Maintenance and
cleaning» there are additional illustrated step-by-step instructions. Always use BERNINA oil to lubricate.
66