Table of Contents
Advertisement
Message on the display
Cause
The needle position doesn't
correspond with the center of the
hoop.
The embroidery module is not
attached.
The hoop is not attached.
The hoop is attached.
The movement of the hoop
follows.
Mega Hoop top.
Mega Hoop center.
Solution
> Calibrate the hoop.
> Connect the embroidery module to the machine.
> Contact the specialized BERNINA dealer to have the
machine checked.
> Attach the hoop.
> Remove the hoop.
> Touch the icon «Confirm».
> Bring the Mega Hoop to the top position.
> Bring the Mega Hoop to the center position.
Appendix
183
Advertisement
Table of Contents
