Power Supply Module; Specification; Power Supply Module Specifications - Mitsubishi MELSEC- Q Q12PHCPU User Manual

5 POWER SUPPLY MODULE

5 POWER SUPPLY MODULE

5.1 Specification

5.1.1 Power supply module specifications

This section gives the specifications of the power supply modules.
Item
Base loading position
Applicable base unit
Input power supply
Input frequency
Input voltage distortion factor
Max. input apparent power
Max. input power
Inrush current
Rated output 5VDC
current
24VDC
External output voltage
Overcurrent 5VDC
protection 1
24VDC
Overvoltage 5VDC
protection 2
24VDC
Efficiency
Permissible instantaneous power
failure time 3
Dielectric withstand voltage
Insulation resistance
Noise immunity
Operation indication
Fuse
Application
Rated switching
voltage/current
Contact
Minimum switching load
output
Response time
section
Life
Surge suppressor
Fuse
Terminal screw size
Applicable wire size
Applicable crimping terminal
Applicable tightening torque
H
External
W
dimensions
D
Weight
5 - 1
Q61P-A1 Q61P-A2
Power supply module loading slot
+10%
100 to 120VAC 200 to 240VAC
-15%
(85 to 132VAC) (170 to 264VAC)
50/60Hz ±5%
Within 5% (See, section 5.1.3)
20A within 8ms
6A
——
——
6.6A or more
——
70% or more
Within 20ms
Across inputs/LG and outputs/FG
2830VAC rms/3 cycles (2000 m (6562 ft.))
Across inputs and outputs (LG and FG separated), across inputs and
LG/FG, across outputs and FG/LG 10M or more by insulation
resistance tester
• By noise simulator of 1500Vp-p noise voltage, 1 s noise width and 25
to 60Hz noise frequency
• Noise voltage IEC61000-4-4, 2kV
LED indication (lit at 5VDC output)
ERR contact (contact switched off (opened: normally closed contact) at an error stop of CPU
module), for CPU module operating status output
OFF to ON: 10ms max. ON to OFF: 12ms max.
Mechanical : More than 2 million times
Electrical : More than 100 thousand times at rated switching voltage/current
0.31kg
Performance Specifications
Q62P
Q3 B, Q6 B
+10%
100 to 240VAC
-15%
(85 to 264VAC)
105VA
——
3A
0.6A
24VDC ±10%
3.3A or more
0.66A or more
5.5 to 6.5V
——
65% or more
Built-in (Unchangeable by user)
24VDC, 0.5A
5VDC, 1mA
No
No
M3.5 × 7
2
0.75 to 2mm
RAV1.25 to 3.5, RAV2 to 3.5
66 to 89N•cm
98mm (3.86inch)
55.2mm (2.33inch)
90mm (3.55inch)
0.39kg
MELSEC-Q
Q63P
+10% +30%
24VDC
-15% -35%
(15.6 to 31.2VDC)
——
——
——
45W
100A within 1ms
6A
——
——
6.6A or more
——
70% or more
Within 10ms
(at 24VDC input)
500VAC across
primary and 5VDC
10M or more by
insulation resistance
tester
By noise simulator of
500Vp-p noise voltage,
1 s noise width and
25 to 60Hz noise
frequency
0.33kg
5 - 1
5