System Configuration For Single Cpu System; System Configuration - Mitsubishi MELSEC- Q Q12PHCPU User Manual

2 SYSTEM CONFIGURATION FOR SINGLE CPU SYSTEM

2 SYSTEM CONFIGURATION FOR SINGLE CPU SYSTEM
This section describes the system configuration of the Process CPU, cautions on use
of the system, and configured equipment.

2.1 System Configuration

The outline of the equipment configuration, configuration with peripheral devices, and
system configuration in the Process CPU system is described below.
(1) Equipment configuration
MITSUBISHI
Memory card
(Q2MEM-1MBS,Q2MEM-2MBS,
Q2MEM-2MBF,Q2MEM-4MBF,
Q2MEM-8MBA,Q2MEM-16MBA,
Q2MEM-32MBA)
2 - 1
1
Process CPU
(Q12PHCPU,Q25PHCPU)
Main base unit
(Q33B,Q35B,Q38B,Q312B)
Extension cable
(QC05B,QC06B,QC12B,QC30B,
QC50B,QC100B)
POINTS
1: The number of memory cards to be installed is one sheet.
The memory card must be selected from SRAM card, Flash card, and ATA
card according to the application and capacity.
With commercial memory cards, the Operation is not assured.
2: The Process CPU cannot use the slim type main base unit (Q32SB, Q33SB,
Q35SB).
3: The Q series power supply module is not required for the Q5 B type extension
base unit.
MITSUBISHI
LITHIUM BATTERY
Battery
(Q6BAT)
Power supply module,
2
I/O module, Intelligent function
module of the Q Series
Extension of the Q Series module
Q5 B extension base unit
(Q52B,Q55B)
Q6 B extension base unit
(Q63B,Q65B,Q68B,Q612B)
Power supply module
I/O module, Intelligent function
module of the Q Series
MELSEC-Q
2
,
3
2 - 1