Garmin GTN 625 Reference Manual page 85

Message
REMOTE KEY
STUCK -
RP Mode key is
stuck.
REMOTE KEY
STUCK -
TAWS inhibit key is
stuck.
SELECT
FREQUENCY -
Select appropriate
NAV frequency for
approach.
SET COURSE -
Set course on
CDI/HSI to [current
DTK].
190-01004-04 Rev. N
Description
The remote RP MODE
key/switch has been
in pressed position for
at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
The TAWS INHIBIT
discrete input has been
in pressed position for
at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
Correct NAV frequency
is not set in the active
NAV frequency for the
approach procedure.
The selected course
on the CDI/HSI does
not match the current
desired track.
GTN 625/635/650 Cockpit Reference Guide
Action
Verify the RP MODE key/switch
is not stuck. Contact dealer for
service if this message persists.
Verify the TAWS INHIBIT key/switch
is not stuck. Contact dealer for
service if this message persists.
Insert the correct frequency into
the active navigation frequency
window.
Set the CDI/HSI selected course to
the current desired track.
75