Lcd Monitor - Philips ESP 2 User Manual

LCD Monitor

The battery condition, number of possible recordings, current mode, and other camera
conditions appear as symbols and numbers on the LCD monitor.
Recording Display
White balance display
(No display) : AUTO
: Daylight mode
: Fluorescent light mode
: Tungsten light mode
Macro mode
Message display
Playback Display
Playback data display
The number of the current file
and the number of available file
are displayed.
Note:
• All data is displayed in this figure. However, only the necessary data is displayed.
• When the LCD monitor is opened, if no camera operations (button or switch operations) are
performed for more than approximately five minutes, the Auto Power Off mode is activated to
conserve energy. The display of the LCD monitor disappears. (The battery is only used slightly in
this condition.) Supply the power again or press the release button for more than one second to
turn the power on.
• The Auto Power Off setting can be changed. See page 56.
Self timer
Exposure compensation
value display
Flash display
: Flash OFF
: Forced flash
(No display) : Auto flash
Recording data display
The remaining number of
images is displayed.
Date and time display
Battery symbol
Clock battery symbol
Date and time display
(The date and time that the
image was shot appears
here.)
5