Saving Your Settings - Philips ESP 2 User Manual

Important
• The power saving mode is automatically set to OFF when the LCD monitor is closed.
• When the camera is used in an environment where the temperature is approximately 40 ° C or
higher, the LCD monitor may have a certain uneven quality. The LCD monitor will return to normal
when the temperature decreases.
Note: Depending on the environment in which the camera is used, the power saving mode can vary
because in the number of recording files can be 1.2 times greater than usual and the playback
time is approximately 2.5 hours.

Saving Your Settings

The Power Off Memory function saves your settings when the power is turned off. If the
power is turned off when the Power Off Memory is set, the Flash mode (see page 36),
White Balance mode (see page 40), Auto Power Off (see page 56) and Automatic Play-
back (see page 51) settings are saved. They will be available when the power is turned
on next. All other camera settings will return to the original positions.
q Press the SELF TIMER button, the U U U U U but-
ton, and the T T T T T button at the same time.
The REC(ord)/PLAY can be set to either REC or
PLAY. The power-off memory setting mode is set.
w Within three seconds, press the U U U U U or T T T T T
button to select ON.
Within three seconds, the Power Off Memory will
be set to ON.
To cancel the setting
Repeat steps 1 and 2 above, selecting OFF at
step 2.
58
DATE