Flash Mode; Selecting A Flash Mode - Philips ESP 2 User Manual

Flash Mode

This section explains how to change the flash mode. You can select the flash mode best
suited to the lighting conditions.

Selecting a Flash Mode

Press the FLASH button repeatedly to select the desired mode.
Flash Off Mode
Important
• The White Balance Mode is set for the Flash Off mode and cannot be changed except when the
White Balance Mode is set to AUTO mode. Perform the operations after changing the White
Balance Mode to AUTO. See "Setting the White Balance Mode" on page 40.
• When performing Macro Shooting, the Flash Off mode is set. The flash mode cannot be changed.
• The light from the flash appears red in the picture if the flash discharges on the subject at a
distance less than the minimum distance (approximately 0.6 m).
36
FLASH button:
Sets the flash mode
Forced Flash Mode Auto Flash Mode (no display)
DATE