Using Ac Power - Philips ESP 2 User Manual

Using AC Power

If you intend to use your camera to record or playback files for a long period of time, use
the optional AC adapter to connect the camera to a household electrical outlet.
R R R R
R
Caution
o
• Make sure the electrical plug is plugged securely into the wall.
About the AC Adaptor
Be sure to read the safety precautions in the manual supplied with the AC adaptor.
q Close the LCD monitor.
Note: See "Turning on the Power" on page 28 for information about the camera power source.
w Connect the cable of the AC adaptor to the DC IN 5 V jack of the camera.
e Insert the plug into an electrical outlet.
Note: When the AC adaptor is used with the camera, it becomes the active power source, even
when the batteries are installed in the camera.
Important
• Plug the power cord firmly into the power source and into the camera. If the power plug or con-
necting cable loosens during recording, data could be lost or damaged.
• When the AC adapter is connected to the camera, the power supply to the camera is temporarily
interrupted during the change of the power source. If this occurs while the camera is in use such
as during recording, playback or erasing, data can be damaged or lost. Therefore, always turn off
the power of the camera before connecting the AC adaptor.
1
21