≥ The time code will reset when the built-in lithium battery is exhausted when it is set to
[FREE RUN].
[TC PRESET]
You can set the initial time code.
1
Select the menu.
MENU
: [RECORD SETUP] # [TC PRESET]
2
Touch the item to set and change with
≥ It will be set to 00h00m00s00f when the [Reset] is touched.
≥ "h" is an abbreviation for hour, "m" for minute, "s" for second and "f" for frame.
3
Touch [EXIT] to complete the setting.
Setting the Recording Counter
Recording Counter will display the recording time in seconds.
0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))
SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE]))
[REC COUNTER]
Select the counting method during the recording.
Select the menu.
MENU
: [DISP SETUP] # [REC COUNTER] # desired setting
[TOTAL]:
[SCENE]:
To reset the Recording Counter for the Recording
Mode
The Recording Counter will be set to 0:00:00 when
touched while displaying the counter.
The count continues to increase until the Recording Counter is reset.
Resets the Recording Counter at start of recording. Counts the time
of each recording session.
- 61 -
/
.
is
RESET
RESET COUNT DISP/
MODE O.I.S. BARS ZEBRA