Table of Contents
Advertisement
Recording
Focus
Perform focus adjustments using the focus ring. If auto focusing is difficult due to the conditions,
then use Manual Focus.
≥ Switch to Manual Mode.
1
Press the FOCUS A/M/¶ button to enable Manual Focus.
≥ It will switch to MF from AF.
2
Adjust the focus by rotating the focus ring.
≥ The focus value can be set from MF00 (focus distance: approximately 3 cm) to MF99 (focus
distance: infinity). The larger the focus value gets, the further the position where focus is
achieved.
≥ If you press and hold the FOCUS A/M/¶ button, focus will be adjusted to MF95 on the infinity
side.
≥ To return to Auto Focus, press the FOCUS A/M/¶ button or set this unit to Intelligent Auto Mode
using the iA/MANU switch.
≥ When the distance to the subject approaches within 1.5 m approx., the unit switches to the macro
range and
or
subject is 1.5 m or more depending on the subject.).
≥ Depending on the zoom magnification, this unit may fail to switch to the macro range, or go to a
non-displayed focus value.
≥ When you perform a zoom operation in the macro range, this unit may go out of focus.
≥ This item cannot be set during Freeze Frame.
∫ To emphasize the outline of images
Setting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines of
an image displayed on the LCD monitor and viewfinder.
You can also adjust the emphasis level or change the frequency.
≥ You can also enable or disable this function with the applicable USER button.
≥ These settings will not affect the images actually recorded.
MENU
: [DISP SETUP] # [EVF/LCD DETAIL] # [ON]
FOCUS
A/M/∞
(l
40)
. (The unit may switch to the macro range even when the distance to the
A FOCUS A/M/¶ button
B Focus ring
(l
68)
- 44 -
(l
70)
Advertisement
Table of Contents
