Configuring Local Area Network - D-Link DVG-N5402G/ACF Quick Installation Manual

Wireless ac1200 dual band gigabit router with fiber wan port, 3g/lte support, 2 fxs ports, 1 pstn (lifeline) port, and usb port

Hide thumbs Also See for DVG-N5402G/ACF:

Table of Contents

DVG-N5402G/ACF

Configuring Local Area Network

1. Go to the Connections Setup / LAN page.

2. If needed, change the IPv4 address of the router's LAN interface and the

mask of the local subnet. To do this, click the IPv4 tab and specify

needed values in the IP address and Mask fields in the Local IP

Address section.

3. If needed, specify your own IPv6 address of the router's LAN interface.

To do this, click the IPv6 tab and select the Static value from the Mode

of local IPv6 address assignment drop-down list in the Local IPv6

Address section. Then specify the needed value in the IPv6 address

field.

Quick Installation Guide

Table of Contents