Changing Lan Ipv4 Address - D-Link DVG-N5402G/ACF Quick Installation Manual

DVG-N5402G/ACF

Changing LAN IPv4 Address

This configuration step is available for the Access point, Repeater, and
Client modes.
1. Select the Automatic obtainment of IPv4 address to let DVG-
N5402G/ACF automatically obtain the LAN IPv4 address.
2. In the Hostname field, you should specify a domain name of the router
using which you can access the web-based interface after finishing the
Wizard. Enter a new domain name of the router ending with .local or
leave the value suggested by the router.
In order to access the web-based interface using the domain name, i n the
!
address bar of the web browser, enter the name of the router with a dot at
the end.
If you want to manually assign the LAN IPv4 address for DVG-N5402G/ACF,
do not select the Automatic obtainment of IPv4 address checkbox and
fill in the IP address, Subnet mask, Hostname fields and, if needed, the
Gateway IP address field. Make sure that the assigned address does not
coincide with the LAN IPv4 address of the router to which your device
connects.
3. Click the NEXT button.
Quick Installation Guide
21