Selecting Operation Mode - D-Link DVG-N5402G/ACF Quick Installation Manual

Wireless ac1200 dual band gigabit router with fiber wan port, 3g/lte support, 2 fxs ports, 1 pstn (lifeline) port, and usb port

Hide thumbs Also See for DVG-N5402G/ACF:

Table of Contents

DVG-N5402G/ACF

Quick Installation Guide

Selecting Operation Mode

In order to connect your device to a wired ISP, on the Device mode page,

from the Connection method list, select the Wired connection value.

Then from the Work mode list select the Router value. In this mode you can

configure a WAN connection, set your own settings for the wireless network in

the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP

phone, and set your own password for access to the web-based interface of the

device.

In order to connect your device to the network of a 3G or LTE operator, on the

Device mode page, from the Connection method list, select the 3G/LTE

modem value. In this mode you can configure a 3G/LTE WAN connection,

set your own settings for the wireless network in the 2.4GHz and 5GHz bands,

and set your own password for access to the web-based interface of the device.

Table of Contents