Configuring Local Area Network - D-Link DIR-615 Quick Installation Manual

Gigabit wireless n300 router with fiber wan port and fe lan ports

Hide thumbs Also See for DIR-615:

Table of Contents

DIR-615

Configuring Local Area Network

Go to the Net / LAN page. If needed, change the IP address of the router's

LAN interface and the mask of the local subnet in the IP Address and

Netmask fields. If you need to change the IPv6 address of the router's

LAN interface, deselect the DHCP PD checkbox in the IPv6 address

assignment section and specify the relevant value in the IPv6 address

field.

DHCP server. By default, the built-in DHCP server of the router assigns

IPv4 addresses to the devices of the LAN. If you want to manually assign

IPv4 addresses, disable the DHCP server (select the Disable value from

the Mode drop-down list).

IPv6 address assignment. By default, the devices of the LAN

automatically assign IPv6 addresses to themselves (the Stateless value is

selected from the Mode drop-down list in the IPv6 address

assignment section). If the devices of the LAN do not support IPv6

address autoconfiguration, enable the built-in DHCPv6 server of the router

(select the Stateful value). If you want to manually assign IPv6 addresses

to devices of the LAN, select the Disable value.

After specifying the DHCP server settings, click the Apply button.

Quick Installation Guide

Table of Contents