Download Print this page

FoodSaver V4925 Owner's Manual page 15

Advertisement

Care
and Cleaning of your Vacuum Sealer
To Clean Appliance:
Press Power Button
9
and remove Power Cord
from electrical outlet. Do not immerse in liquid.
Slide out Drip Tray Drawer (O). Remove Drip Tray
for cleaning by pulling up on the two side tabs.
Check Lower Gasket (N) around Drip Tray (O) to
make sure it is free from food materials.
Do not attempt to remove gaskets.
Antibacterial Drip Tray:
Empty Drip Tray after each use. Wash in warm soapy water or
place in top rack of dishwasher. The Adjustable Food Sensors
in the Drip Tray (O) will not function correctly if liquid is
allowed to remain in Drip Tray.
This appliance has a Tray Full indicator
liquid fills the Drip Tray, the unit will turn off and the Tray
Full Indicator light will activate. To resume normal operation,
Slide out Drip Tray Drawer. Remove Drip Tray for cleaning
by pulling up on the two side tabs. When replacing drip
tray, set the right end of the drip tray into place, then firmly
snap both sides down. Appliance can be used without Drip
Tray, however the Adjustable Food Sensor setting
function without the Drip Tray.
Retractable Handheld Sealer Reservoir:
Empty Reservoir after each use. Wash in warm soapy water.
Air dry before replacing.
IMPORTANT: To remove Reservoir from
Retractable Handheld Sealer:
While holding top portion by hose
pull clear Reservoir down and off.
3
. When excess
will not
7
Customer Service: 1 (877) 777-8042
Slide out drawer to
Push In
access Drip Tray
Tabs
Remove All Food
Around Gaskets
DO NOT ATTEMPT
TO REMOVE
GASKETS
Push In
Tabs
15

Advertisement

loading