Advertisement
Use FoodSaver
FoodSaver
Canisters, Jar Sealers, or Bottle Stoppers
®
2. Pull Retractable Handheld Sealer from appliance and remove clear bottom portion
Fig. 1
3. Push Accessory Button to begin vacuum process. Motor will run until vacuum
4. When motor turns off, gently twist and remove Handheld Sealer from accessory.
NOTE: If you are using a canister with large white knob, rotate knob clockwise to the "Closed" position, then
gently twist and remove Handheld Sealer from accessory.
5. To test vacuum, simply tug on accessory lid. It should not move.
6. To retract Handheld Sealer, while holding unit, gently pull on hose end to allow hose to retract into
appliance. Do not release freely as it may damage the Handheld Sealer.
IMPORTANT: When pulling hose Do Not extend beyond red line marked on hose.
Empty Drip Tray
This FoodSaver
model comes with a convenient,
®
pull-out drawer to access the Drip Tray (O).
1. Simply slide it out, then pull up on side handles
of Drip Tray to remove.
2. Drip Tray can be emptied and washed with warm,
soapy water or in the dishwasher on the top rack.
Vacuum Sealing Accessories (cont)
®
of handheld from top handle (Fig.1). Insert the end into the port on accessory. Twist
tab while inserting to ensure a tight fit.
process is complete. (See "HOW TO MARINATE WITH YOUR FOODSAVER
APPLIANCE" on page 14.)
Customer Service: 1 (877) 777-8042
1. Prepare canister, jar sealer or bottle
stopper according to FoodSaver
Accessory Guidelines, which are
included with accessory purchases.
®
O
13
Advertisement
