Advertisement
How to...
Remove Air from a Bag
Avoid wrinkles when inserting the bag into the
Vacuum Channel (F).
Wrinkles in seal may cause leakage and allow
air to return into bag. To eliminate any wrinkles
while inserting bag, gently slide bag curl down
into the Vacuum Channel (F), and hold bag with
two hands gently stretching bag flat until vacuum
pump begins. If you find wrinkles after sealing
bag, simply cut bag open and vacuum seal again.
Use FoodSaver
FoodSaver
FreshSaver
®
NOTE: Do not reuse Zipper Bags after heating in the microwave.
Do not put Zipper Bags in the Dishwasher.
FoodSaver
FreshSaver
®
12
Vacuum Sealing Accessories
®
Zipper Bags
®
1. Place food into Zipper Bag. Make sure not to put any food
under valve. Press zipper closed with finger while bag is
lying down on a flat surface.
2. Pull Retractable Handheld Sealer from appliance.
Place end over the gray valve on bag.
3. Push accessory button to begin vacuum process.
Motor will run until vacuum process is complete.
Containers
®
1. Prepare container according to FoodSaver
Guidelines, which are included with accessory purchases.
2. Pull Retractable Handheld Sealer from appliance.
Place end over gray valve on container.
3. Push accessory button to begin vacuum process.
Motor will run until vacuum process is complete.
www.FoodSaver.com
If motor runs for more than 30 seconds without
stopping, consider the following:
If you are vacuum sealing with a bag, make sure
one end of the bag is properly sealed.
(See "HOW TO MAKE A BAG FROM A ROLL"
on page 10.)
If vacuum sealing with an accessory, check
Handheld Sealer connections to ensure a tight fit.
Accessory
®
Advertisement
